Silverbirch Broadland 16 Duracore Plus Canoe

From £1,160.00


For a discussion on the relative merits of custom options for Silverbirch traditional canoes why not read our staff written blog here.

Drawing on the classic lines and proven design characteristics of a traditional Prospector canoe, the Broadland is a true all rounder and a real workhorse.

In producing the Broadland Silverbirch have optimized the chine, camber, and sidewall profile from the original Prospector design to increase both primary and secondary stability – making the Broadland a confidence inspiring canoe to paddle.

A carefully considered rocker profile, and a symmetrical hull form ensure the Broadland 15 and 16 paddle well either tandem or solo.


All Silverbirch canoes are manufactured in a specialist production facility in Norfolk and are available in two specially developed constructions:

Duracore plus:

Duracore plus is a tough and durable three-layer Polyethylene material that is built to last with a tough, high-density outer skin, a closed cell foam core, and a medium density inside skin to help dissipate the energy from impacts.

Duracore plus is made with a tough, UV stable, and abrasion resistant outer skin, and is easily repairable at home should you ever have an accident and damage it.


The outer skin is made with an incredibly stiff and tough whitewater grade plastic – the best Silverbirch can find.  The internal foam has been optimized to have a lower density, giving a thicker core than that found in Duracore, and the material distribution between the layers has been optimised to make the most of the superior materials.

The result? Stiffer, lighter, and yet just as durable!

The noticeable weight saving over our Duracore laminate puts many models made with Duralite into close competition with more expensive canoes produced with composite or royalex construction methods.


Both Duracore plus and Duralite laminates come with a choice of trim options. Vinyl is fitted as standard and comes with a webbing seat, ash handles, and an ash thwart. Beautiful, hand crafted ash gunwales are an optional extra.


The custom vinyl gunwale profile is matched with webbing seats, plastic end plates, and ash handles and carrying yoke to give a durable, low maintenance outfitting option.


Every canoe with ash gunwales is hand finished with pride at the Norfolk production facility. After carefully fitting the ash profiles, the gunwales are planed and oiled by hand, and then matched with ash end plates, ash handles and carrying yoke, and webbing bound ash seats. Not only does it give a beautiful, natural finish, but is several kilos lighter than the vinyl alternative.

Bespoke Options

As every Silverbirch canoe is hand finished in their Norfolk production facility you benefit from the ability to specify options custom to your requirements, including but not limited to:

End Lacing

Factory fitted lacing, stitched directly through the hull under the gunwale for maximum strength and threaded through polyethylene tubing internally for abrasion resistance.

This partial lacing is ideal for use with buoyancy bags up to 32" and is perfect for scenarios where you may not want to have your bags permanently fixed in position.

Airbags are not supplied with this option and shown for illustration purposes only.

Full Length Lacing

Full length lacing of your canoe creates internal attachment points at 80mm intervals throughout the length of your canoe, ideal for securely attaching gear, cargo, and buoyancy to.

Massively boosting the versatility of your boat, full length lacing allows you to quickly vary the configuration of your airbags and gear or to remove it all completely when not needed. As such full length lacing is one of the most popular options.

Airbags are not supplied with this option and shown for illustration purposes only.

Rope End Grabs

Factory fitted rope end grabs, drilled directly through your hull using 10mm floating line in either yellow or orange.

Painters are available in matching colour.


A range of seat, thwart and yoke upgrades are available.  Contact us for more information.

Highline Trim

It is possible to specify your new canoe with highline trim, meaning the sidewall of the boat is 25mm deeper for a drier ride in moving water.

Custom Colours

Silverbirch are one of only a few brands capable of producing one off bespoke graphics.  If you'd love to set your artistic side free then please get in touch with us to discuss.



Overall length - 4845 mm / 15'11'

Width at gunwale - 922 mm / 36.25"

Max width - 934 mm / 36.75"

Rocker bow & stern - 62 mm / 2'5"

Depth bow & stern - 520 mm / 20.5"

Depth middle - 370 mm / 14.5"



Ash gunwales - 31.5 Kg / 69.5 lb

Vinyl gunwales - 33.5 Kg / 74 lb


Ash gunwales - 36.5 Kg / 80.5 lb

Vinyl gunwales - 38.5 Kg / 85lb