Point 7 BlackCore 80% Carbon Mast

SKU
P7-1980S
From £369.00

               

If you strive for perfection and want 100% carbon performance but without the price then the BlackCore 80 is your perfect partner.  Available in a range for lengths and both reduced and standard diameter.

Designed, Developed, Produced, Assembled in ITALY.
The BlackCore mast range comprises an 80% carbon content and is produced to the exact specifications of the Point-7 standards for bend-curve and hardness. The performance against the BlackPrime is very minimal and can only be measured with a clock, it will not be felt. Using the same high-performance construction ensures this mast superior performance in comparison with others in its class.

Why Choose This Mast

The high carbon content and quality of this mast will ensure durability and a good reflex that will lighten the feeling of any rig. Advantages gained from a higher glass content and lower carbon percentage, is that the masts are better protected against breakage but thereby also a little slower in its response than a pure carbon mast.

KEY FEATURES

  • An extra catapult, an extra crash, long time rigged, this mast will not suffer
  • Best compromise between price, performance and durability
  • Racing without any type of stress or worries
  • Consists of 3 carbon layers and 1 layer of glass

SPECIFICATIONS

CORE Type % Bottom % Imcs Top % Type

Compatible

with

weight (KG)

+-5%

400 SDM 80 64 20.5 74.5 Soft bottomHard top Constant Curve 1,52
430 SDM 80 64 21 75 Soft bottom Constant Curve 1,71
460 SDM 80 63.5 24.5 75.5 Constant Curve Constant Curve 1,90
490 SDM 80 63 28 77 Flextop Flextop 2,19
340 RDM 80 63 15 75 Constant Curve Constant Curve 1,24
370 RDM 80 63 17 75 Constant Curve Constant Curve 1,52
400 RDM 80 63 19 75 Constant Curve Constant Curve 1,62
430 RDM 80 63 21 75 Constant Curve Constant Curve

2,00


Point 7 masts are manufactured using the Prepreg-Autoclave process which creates an extremely homogenous carbon/resin mix under high pressure. Using a newly patented procedure which allows the resin to be distributed in equal quantities around the mast walls, the masts are guaranteed to have an equal curve around all its diameter, and thus more uniform in comparison to former production procedures. The resin is reduced to an absolute minimum for unprecedented durability. The resin used is top quality as well and will give support to the carbon even on very hot temperatures and on water crashes.