| All
the characteristics required by the most demanding divers, plus
much, much more. M1 is the most complete and easy to use dive
computer for both recreational and technical diving. Also ideal
for freediving, thanks to the "bottom time" mode,
which indicates the dive time in minutes and seconds. A sleek
and distinctive look, controlled by just 2 mechanical buttons
(Mares patent). Powered by 2 1.5V AAA batteries, easily obtainable
anywhere in the world. |
|
Technical
Characteristics
- Algorithm:
with 11 tissues, of the exponential-deterministic type,
with M values (low bubble) derived from the studies of
Rogers and Powell (modified Haldanean)
- Display
protected by scratch-resistant mineral glass
- Two
push buttons for selecting functions (Mares patent)
- Powered
by 2 1.5 Volt AAA batteries
- Quartz
calendar clock
- Maximum
operating depth: 150m/495 feet
- Maximum
depth of first decompression stop: 24m/80 feet
- Operating
temperature: from -10 to +50oC (14 to 122oF)
- Storage
temperature: from -20 to +70oC (-4 to +158oF)
|
Traditional
dive functions
- Current
depth/maximum depth achieved (on request)
- Dive
time
- Remaining
no-stop time at the current depth (no dec)
- Decompression
stop times
- Total
time to surface
- Water
temperature (on request)
- Speed
of ascent (expressed as a percentage of the maximum allowable
ascent rate)
- Value
for CNS O2 LIMIT % (in the case of Nitrox dives)
- Dive
time in minutes and seconds (in bottom time mode)
Surface
functions
- Surface
time
- Logbook
facility for storing 50 dives in memory
- Profiles
of the last 50 dives, at 20 second intervals (max 38 hours)
- Desaturation
time display (desat)
- Time-to-fly
(no fly)
- Calendar
clock
- Air
temperature
- Self-check
- Scrolling
of no-stop times for planning repetitive dives
- Dive
simulator
Alarms
- No
decompression limit reached
- Excessively
rapid ascent
- Omitted
decompression stop
- Low
battery
- Max
permitted depth for the programmed PPO2 value
(for Nitrox dives)
Special
functions
- Setting
of Air/Nitrox/Bottom time programs
- Setting
of percentage O2 from 21% to 50%, in increments
of 1%
- Settign
of PPO2 max from 1.2 to 1.6 bar
- Infrared
PC interface with possibility of printing the logbook
and the profile of each dive (optional)
- Changing
the units of measurement (m/feet - oC/oF)
- 4
manually selectable altitude programs
- History
of the total number of dives, the deepest dive logged,
the lowest temperature measured underwater, and the total
hours of diving
- Display
backlight, timed or permanently illuminated (using push-button
controls)
- No
loss of memory during batteyr change
- Percent
ascent rate indicator
- Function
for clearing residual nitrogen memory
- Function
for disabling audible alarms
- Fresh
water/seawater setting (default fresh)
- Function
for disabling "uncontrollable ascent" feature
- Function
for selecting the program
- Recording
of dive errors in memory
|
